workmanship has been of the highest standard.
Glason WonderSeal™ GL2000
WonderSeal™ GL2000 is a clear waterborne penetrating sealant designed for garage floors and non coloured concrete driveways and is the result of years of research based on advanced reactive siliconate technology.
The reason we specify non coloured concrete is that the sealant reacts with one of the constituents in the cement and 'grows' within the pores to form an effective seal. On occasions or when over applied, this effect can cause mild whitening on the surface. On non coloured concrete this is not evident.
As a penetrative sealant, it has no visible finish and will not generally alter the co-efficient friction of the surface.
WonderSeal™ GL2000 has excellent resistance to oil and grease as well as most solvent systems.
Decorative effects are easily achieved as this product can safely be top coated with either a waterborne or alkyd paint system.
WonderSeal™ GL2000 has been used effectively on plain concrete or pavers without colour such as buildings made with concrete slabs, masonry pavers and concrete blocks.
In Regard to: Glason (Group) Pressure Cleaning Pty Ltd
I have known the team from Glason's personally and professionally for two years and they have always exhibited honesty, integrity and professionalism especially in all dealings with our contracts and clients.
The continued persistence to achieve extremely high levels of service along with professional pride in their workmanship.
The team has taken on the large project of bringing the Ourimbah Campus back to it's former glory and the workmanship has been of the highest standard, the buildings and grounds have attracted many a comment of praise from the wider community.
In the time I have been associated with the Glason team; They have at all times proven to have the strongest work ethic and values.
I would like to wish Dennis and his team well in all future endeavours.
Regards,
David R Westaway
Senior Facilities Officer
University of Newcastle
Ourimbah Campus
DIRECTIONS
SURFACE PREPARATION:
1. Surface should be clean, sound and totally dry to allow the product to penetrate as deep as possible.
2. Surface is to be free of contaminants.
3. Surface to be fully cured.
4. Apply WonderSeal™ GL2000 as a light mist from backpack spray. DO NOT AGITATE.
5. Allow to dry.
APPLICATION:
1 coat application.
COVERAGE:
10 to 20 sq metres per litre dependant upon surface porosity.
CLEAN UP:
Wash out with water.
DRYING TIMES:
Touch dry in 30 minutes.